Main uses and characteristics of vehicles
The car uses a unique patented technology, which can not only deal with micron and submicron dust particles (can eliminate fine dust particles less than 1um), but also deal with some high temperature, high humidity, toxic and harmful dust particles and gases, with a dust removal efficiency of up to 99%. Based on the principle of negative pressure collection and positive pressure discharge, the materials are discharged into the recovery bin or designated place to complete the cleaning, collection and transportation of various bulk materials in a closed way, which has many advantages such as saving resources, protecting the environment and reducing labor intensity.
The vehicle can not only pump solid materials and dust, but also wet liquid materials. It can also be used to dredge and clean various sewer pipes. In addition, it can be used to reduce dust in local space. Widely used in steel, coking, power generation, cement, petrochemical and other industries dust, ash powder, cement, lime powder, iron powder, solid waste liquid and other materials collection, shipping. It can also be used for emergency treatment of sudden environmental pollution accidents, such as the collection of toxic and harmful materials caused by traffic accidents.

Product TechnologyParameter Table

Serial number	entry name		Detailed description
1	Whole Vehicle	Vehicle name	Powder material suction and discharge truck
		Chassis	DFH1310A（Dongfeng Tianlong）
		Engine	Di75E350-60（Cummins, G6）
		Transmission case	9JS150T-B（fast 9）
		Configure	11.00R20tire, ABS, air conditioner
		wheelbase	1995+4600+1350
		Total mass kg	31000
		Overall dimension mm	11700×2520×3880
2	Engine	Emission standard	Sixth grade
		Power kw	257
		Fuel type	diesel oil
3	Material tank	Tank volume m3	23
		Tank material	Q345B
		Tank wall thickness mm	6
		Design pressure bar	-0.9/3
		Feed valve	6英寸
		Maximum lifting angle of tank（º）	≥45
		Hydraulic jacking pump	Front single top, double acting cylinder
		Rapping system	Imported vibration system to prevent hardening of materials
		Back cover opening mode	hydraulic pressure
4	Suction system	Vacuum degree bar	-0.7
		Maximum air flow m3/h	5500（US imported R00TS  624J）
		Suction Distance m	≥20
		Suction port configuration	DN150 disc valve (DN 150 quick connection)
		Loading speed	30-60 m3/h
5	Discharge system	Discharge mode	1. Pressure discharge, 2. Open the back cover to lift and dump, 3. Add external air source interface (DN65)
		Air compressor	Wuhu Fuda oil free swing air compressor
			DBW-10-2
		Working pressure bar	2
		Maximum displacement  m3/h	600
		Discharge valve	4inches
		Surplus rate ‰	≤2
		Discharge speed	30-60m3/h
6	Dust removal system	Inertia dust collector	Dust removal accuracy＞50μm
			The dust removal efficiency is 96%,
		Cyclone system	Dust removal accuracy＞5μm
			The dust removal efficiency is94%，
			The maximum treatment temperature is 200℃
		Bag filter	Bag filter (dust removal accuracy: 1μm,）
			Dust removal efficiency≥99%
			The maximum treatment temperature is 200℃
			Automatic cleaning: compressed air back blowing
7	Brace	Hydraulic support	Hydraulic support